Go Back
SJ-90+60+45 Triple Layer Co-Extrusion Line For Dual Colors And Daul Layers Cable
Application: Suitable for extrusion of PE, PVC, LSFH, XLPE, mainly used for the production of building wire.
More Details
SJ-90+60+45 Triple Layer Co-Extrusion Line For Dual Colors And Daul Layers Cable
Main technical parameters:
- Input conductor dia:Ø1.0- Ø23mm
- Extruding Sheath out dia:Ø1.5- Ø25mm
- Screw rod diameter :Ø90mm, Ø60mm Ø45mm
- Screw L/D:25:1
- Main extruder screw rod speed 80r/min #90, 80r/min #60, 60r/min #45,
- Max extrusion capacity:280kg/h(PVC), 200kg/h(LSZH)
- Max linear speed:350m/min
- Capstan wheel diameter:Ø700mm
- Pay-off bobbin size:PN630-PN1000
- Take-up bobbin size:PN800-PN1250
- Full machine total power:150KW
- Water consumption:Circulation
- Operating direction:Customized(To be determined)
- Working voltage:3 phase -5 wires. AC440 (±10%),-60HZ,
- Heaters power:277 Volts single phase, 60 Hz
Main Component:
- Ø1000mm Magnetic pay-off
- Input wire Straightener
- SJ-90/25 extruder(with pressure display)
- Ø40mm Adjustable Cross-head
- SJ-45/20 Vertical skin color extruder(co-extrusion)
- SJ-60/25 extruder(with pressure display)
- Ø35mm Adjustable Cross-head
- Automatic Hopper and loader
- Masterbatch mixer for the co-extruder for color skin
- Laser diameter gauge
- 1.5m moveable Stainless steel water cooling through
- 20m Dual layer stainless steel cooling through
- Blow Drying device
- 15kv spark tester
- Ø700mm dual wheel capstan
- 12m Horizontal wire accumulator
- Ø1250mm Shaftless take-up and traverse
- C1860 Automatic coiling machine
- Electrical control system of unit
- G200 Dehumidifying Dryer
Combined control cabinet system
- Power supply: 3-phase 5 wire system, 440V (± 10%), 60HZ, single-phase control voltage 220V.
- The operating system of the whole machine is controlled by Siemens PLC module, which can be controlled by single action or linkage. And through Siemens 10.1 inch touch screen visual operation.
- Operator panel, to be fit in a suitable position close to the drawing machine, with all push buttons and lamps needed for the easy and correct use of the line supplied with a HMI Display.
- Operation
- Manual, Synchronous or automatic mode
- Connect with drivers and HMI by profinet;
- It takes all the controls and inspections of the whole line, provides strong and complete control capabilities
- Main HMI
- HMI for all single part;
- HMI for all production data;
- HMI for Alarm message;
- HMI for control when button broken;
- HMI for maintaince;
- HMI for production monitor
- Alarm information
- Motor driver fault;
- Cooling fan overload;
- Motor fan overload;
Equipment operation direction: Customized(To be determined)
The color of the equipment is implemented according to the user's requirement
Layout of Cable Extrusion Line of 90+60+45
Other Main Products:
- Extrusion Machine,
- Cable & Wire Extrusion Lines,
- Cable & Wire Extrusion Machines,
- Nylon Extruder Machine,
- Cable Making Equipment,
- Double Twisting Bunching Machine,
- Building Wire Extruder Machine,
- Power Cable Extruder Machine,
- Twisting Machine, Wrapping Machine